C613-50055-01 REV A Command Reference for x230 Series Edge Switches 1419
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
LLDP COMMANDS
SHOW
LLDP NEIGHBORS DETAIL
show lldp neighbors detail
Overview This command displays in detail the information received from neighbors via
specified ports. If no port list is supplied, detailed neighbor information for all ports
is displayed.
Syntax
show lldp neighbors detail [base] [dot1] [dot3] [med] [interface
<port-list>]
Mode User Exec and Privileged Exec
Examples To display detailed neighbor information received via all ports, use the command:
awplus# show lldp neighbors detail
To display detailed neighbor information received via ports 1.0.1, use the
command:
awplus# show lldp neighbors detail interface port1.0.1
Parameter Description
base Information for base TLVs.
dot1 Information for 802.1 TLVs.
dot3 Information for 803.1 TLVs.
med Information for LLDP-MED TLVs.
<port-list> The ports for which the neighbor information is to be shown.
To Next Page
Loading...
Need help?
General
