C613-50055-01 REV A Command Reference for x230 Series Edge Switches 407
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
SPANNING TREE COMMANDS
CLEAR
SPANNING-TREE DETECTED PROTOCOLS (RSTP AND MSTP)
clear spanning-tree detected protocols
(RSTP and MSTP)
Overview Use this command to clear the detected protocols for a specific port, or all ports.
Use this command in RSTP or MSTP mode only.
Syntax
clear spanning-tree detected protocols [interface <port>]
Mode Privileged Exec
Example
awplus# clear spanning-tree detected protocols
Parameter Description
<port> The port to clear detected protocols for. The port may be a switch
port (e.g. port1.0.4), a static channel group (e.g. sa2), or a
dynamic (LACP) channel group (e.g. po2).
To Next Page
Loading...
