C613-50055-01 REV A Command Reference for x230 Series Edge Switches 523
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
POWER OVER ETHERNET COMMANDS
SHOW
POWER-INLINE COUNTERS
show power-inline counters
Overview This command displays Power over Ethernet (PoE) event counters for ports on the
Power Sourcing Equipment (PSE). The PoE event counters displayed can also be
accessed by objects in the PoE MIB (RFC 3621). See the MIB Objects Feature
Overview and Configuration Guide for information about which PoE MIB objects
are supported.
For information on filtering and saving command output, see “Controlling “show”
Command Output” in the “Getting Started with AlliedWare Plus” Feature
Overviewand Configuration Guide.
Syntax
show power-inline counters [<port-list>]
Mode User Exec and Privileged Exec
Usage To display all PoE event counters for all PoE ports on the PSE, do not enter the
optional interface parameter.
Examples To display all PoE event counters for all PoE ports on the PSE, use the command:
awplus# show power-inline counters
To display the PoE event counters for the port range 1.0.1 to 1.0.3, use the
command:
awplus# show power-inline counters interface port1.0.1-1.0.3
Parameter Description
<port-list> Enter the PoE port(s) to display all PoE event counters for them.
To Next Page
Loading...
