166 Command Reference for x230 Series Edge Switches C613-50055-01 REV A
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
LICENSING COMMANDS
LICENSE
license
Overview This command activates the licensed software feature set on a device.
Use the no variant of this command to deactivate the licensed software feature set
on a device.
For feature licenses, contact your authorized distributor or reseller. If a license key
expires or is incorrect so the license key is invalid, then some software features will
be unavailable.
NOTE: See the AlliedWare Plus™ datasheet for a list of current feature licenses available
by product, and the AlliedWare Plus™ How To notes for information on obtaining
them. Purchase licenses from your authorized dealer or reseller.
Syntax
license <label> <key>
no license <label>
Mode Privileged Exec
Usage You can change the license label using this command to make it specific to you
when you initially add a license. Once a license is added, any change to the license
label first requires removal of the license before adding a license again with a new
license label.
The default feature license labels are issued along with encrypted license keys by
e-mail for you to apply using this command to activate features. You can change
default feature license labels, but they must be 15 characters or less to be accepted
with the issued keys.
Examples To activate the license name1 with the key
12345678ABCDE123456789ABCDE, use the command:
awplus# license name1 12345678ABCDE123456789ABCDE
To deactivate the license name1, use the command:
awplus# no license name1
Validation
Command
show license
Parameter Description
<label> A name for the feature license. To determine names already in
use, use the show license command. This can be the default
name supplied for the feature, or a renamed feature name.
<key> The encrypted license key to enable a set of software features.
To Next Page
Loading...
Need help?
General
