Allied Telesis AlliedWare Plus AT-x230-10GP - Epsr Mode Master Controlvlan Primary Port

1146 Command Reference for x230 Series Edge Switches C613-50055-01 REV A
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
EPSR COMMANDS
EPSR
MODE MASTER CONTROLVLAN PRIMARY PORT
epsr mode master controlvlan primary port
Overview This command creates a master EPSR instance. Your switch is unable to run this
command because it cannot function as an EPSR master node. To include these
switches in an EPSR ring you will need to use an alternative Allied Telesis switch,
such as an x610 Series switch, as the master node. For more information on this
command, refer to the manual of your master EPSR node’s switch.