C613-50055-01 REV A Command Reference for x230 Series Edge Switches 303
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
INTERFACE COMMANDS
SHOW
INTERFACE BRIEF
show interface brief
Overview Use this command to display brief interface, configuration, and status information,
including provisioning information.
For information on filtering and saving command output, see “Controlling “show”
Command Output” in the “Getting Started with AlliedWare Plus” Feature Overview
and Configuration Guide.
Syntax
show interface brief
Mode User Exec and Privileged Exec
Output Figure 8-4: Example output from the show interface brief command
Related
Commands
show interface
show interface memory
awplus#show int brief
Interface Status Protocol
port1.0.1 admin up down
port1.0.2 admin up down
port1.0.3 admin up down
port1.0.4 admin up down
port1.0.5 admin up down
port1.0.6 admin up running
lo admin up running
vlan1 admin up down
vlan2 admin up down
Table 8-1: Parameters in the output of the show interface brief command
Parameter Description
Interface The name or type of interface.
Status The administrative state. This can be either admin up or admin
down.
Protocol The link state. This can be either down, running, or provisioned.
To Next Page
Loading...
Need help?
General
