C613-50055-01 REV A Command Reference for x230 Series Edge Switches 153
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
FILE MANAGEMENT COMMANDS
SHOW
RUNNING-CONFIG IPV6 ACCESS-LIST
show running-config ipv6 access-list
Overview Use this command to show the running system status and configuration for IPv6
ACLs.
For information on filtering and saving command output, see “Controlling “show”
Command Output” in the “Getting Started with AlliedWare Plus” Feature Overview
and Configuration Guide.
Syntax
show running-config ipv6 access-list
Mode Privileged Exec and Global Configuration
Example To display the running system status and configuration for IPv6 ACLs, use the
command:
awplus# show running-config ipv6 access-list
Output Figure 3-16: Example output from the show running-config ipv6 access-list
command
Related
Commands
copy running-config
show running-config
!
ipv6 access-list abc permit any
!
To Next Page
Loading...
