Allied Telesis AlliedWare Plus AT-x230-10GP - Show Mls Qos Interface

796 Command Reference for x230 Series Edge Switches C613-50055-01 REV A
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
QOS COMMANDS
SHOW
MLS QOS INTERFACE
show mls qos interface
Overview Displays the current settings for the interface. This includes its default CoS and
queue, scheduling used for each queue, and any policies/maps that are attached.
Syntax
show mls qos interface [<port>]
Mode User Exec and Privileged Exec
Example To display current CoS and queue settings for interface port1.0.1, use the
command:
awplus# show mls qos interface port1.0.1
Parameter Description
<port> Switch port.