198 Command Reference for x230 Series Edge Switches C613-50055-01 REV A
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
SYSTEM CONFIGURATION AND MONITORING COMMANDS
SHOW
CPU HISTORY
show cpu history
Overview This command prints a graph showing the historical CPU utilization.
For information on filtering and saving command output, see “Controlling “show”
Command Output” in the “Getting Started with AlliedWare Plus” Feature Overview
and Configuration Guide.
Syntax
Mode User Exec and Privileged Exec
Usage This command’s output displays three graphs of the percentage CPU utilization:
• per second for the last minute, then
• per minute for the last hour, then
• per 30 minutes for the last 30 hours.
Examples To display a graph showing the historical CPU utilization of the device, use the
command:
awplus# show cpu history
To Next Page
Loading...
Need help?
General
