C613-50055-01 REV A Command Reference for x230 Series Edge Switches 347
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
SWITCHING COMMANDS
SHOW
INTERFACE ERR-DISABLED
show interface err-disabled
Overview Use this command to show the ports which have been dynamically shut down by
protocols running on the device and the protocols responsible for the shutdown.
Syntax
show interface [<IFRANGE> err-disabled]
Mode User Exec and Privileged Exec
Example Show the protocols that have shut down port2.0.21 and port2.0.23, use the
commands:
awplus# show interface err-disabled
Output Figure 10-2: Example output from the show interface err-disabled command
Parameter Description
<IFRANGE> Interface range
err-disabled Brief summary of interfaces shut down by protocols
awplus#show interface err-disabled
Interface Reason
port2.0.21
loop protection
port2.0.23
loop protection
To Next Page
Loading...
