Allied Telesis AlliedWare Plus AT-x230-10GP - Epsr State

C613-50055-01 REV A Command Reference for x230 Series Edge Switches 1149
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
EPSR COMMANDS
EPSR
STATE
epsr state
Overview This command enables or disables an EPSR instance.
Syntax
epsr <epsr-instance> state {enabled|disabled}
Mode EPSR Configuration
Example To enable the EPSR instance called blue, use the command:
awplus(config-epsr)# epsr blue state enabled
Related
Commands
epsr mode master controlvlan primary port
epsr mode transit controlvlan
Parameter Description
<epsr-instance> The name of the EPSR instance.
state The operational state of the ring.
enabled EPSR instance is enabled.
disabled EPSR instance is disabled.