Allied Telesis AlliedWare Plus AT-x230-10GP - Show Ipv6 Neighbors

586 Command Reference for x230 Series Edge Switches C613-50055-01 REV A
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
IPV6 COMMANDS
SHOW
IPV6 NEIGHBORS
show ipv6 neighbors
Overview Use this command to display all IPv6 neighbors.
For information on filtering and saving command output, see “Controlling “show”
Command Output” in the “Getting Started with AlliedWare Plus” Feature Overview
and Configuration Guide.
Syntax
show ipv6 neighbors
Mode User Exec and Privileged Exec