C613-50055-01 REV A Command Reference for x230 Series Edge Switches 1315
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
NTP COMMANDS
SHOW
NTP STATUS
show ntp status
Overview Use this command to display the status of the Network Time Protocol (NTP).
Syntax
show ntp status
Mode User Exec and Privileged Exec
Example See the sample output of the show ntp status command displaying information
about the Network Time Protocol.
Figure 37-2: Example output from the show ntp status command
awplus#sh ntp status
Clock is synchronized, stratum 3, reference is 127.127.1.0
actual frequency is 0.0000 Hz, precision is 2**-19
reference time is cf11f3f2.c7c081a1 (00:44:34.780 UTC Tue Feb 2
2010)
clock offset is 0.000 msec, root delay is 0.000 msec
root dispersion is 7947729.000 msec,
awplus#
To Next Page
Loading...
