Allied Telesis AlliedWare Plus AT-x230-10GP - Show System

216 Command Reference for x230 Series Edge Switches C613-50055-01 REV A
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
SYSTEM CONFIGURATION AND MONITORING COMMANDS
SHOW
SYSTEM
show system
Overview This command displays general system information about the device, including
the hardware installed, memory, and software versions loaded. It also displays
location and contact details when these have been set.
For information on filtering and saving command output, see “Controlling “show”
Command Output” in the “Getting Started with AlliedWare Plus” Feature Overview
and Configuration Guide.
Syntax
show system
Mode User Exec and Privileged Exec
Example To display configuration information, use the command:
awplus# show system
Output Figure 5-16: Example output from the show system command
Related
Commands
show system environment
awplus#show system
Switch System Status Mon Mar 10 04:12:14 2014
Board ID Bay Board Name Rev Serial number
--------------------------------------------------------------------------------
Base 367 x210-16XT B-0 G22SC403U
--------------------------------------------------------------------------------
RAM: Total: 124384 kB Free: 64324kB
Flash: 63.0MB Used: 34.4 MB Available: 28.6MB
--------------------------------------------------------------------------------
Environment Status: Normal
Uptime: 0 days 04:26:02
Bootloader version : 1.0.9
Current software : x230-5.4.5-0.1.rel
Software version : 5.4.4
Build date : Mon Mar 03 09:27:05 NZST 2014
Current boot config: flash:/default.cfg (file exists)
System Name
awplus
System Contact
System Location