Allied Telesis AlliedWare Plus AT-x230-10GP - Show Running-Config Lldp

C613-50055-01 REV A Command Reference for x230 Series Edge Switches 155
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
FILE MANAGEMENT COMMANDS
SHOW
RUNNING-CONFIG LLDP
show running-config lldp
Overview This command shows the current running configuration of LLDP.
Syntax
show running-config lldp
Mode Privileged Exec and Global Configuration
Example To display the current configuration of LLDP, use the command:
awplus# show running-config lldp
Output Figure 3-18: Example output from the show running-config lldp command
Related
Commands
show lldp
show lldp interface
awplus#show running-config lldp
lldp notification-interval 10
lldp timer 20
!
interface port1.0.1
lldp notifications
lldp tlv-select port-description
lldp tlv-select system-name
lldp tlv-select system-description
lldp tlv-select management-address
lldp transmit receive