35
1164 Command Reference for x230 Series Edge Switches C613-50055-01 REV A
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
AMF Commands
Introduction
This chapter provides an alphabetical reference for AMF commands.
AMF Naming
Convention
When AMF is enabled on a device, it will automatically be assigned a host name. If
a host name has already been assigned, by using the command hostname on page
186, this will remain. If however, no host name has been assigned, then the name
applied will be the prefix, host_ followed (without a space) by the MAC address of
the device. For example, a device whose MAC address is 0016.76b1.7a5e will have
the name host_0016_76b1_7a5e assigned to it.
To efficiently manage your network using AMF, we strongly advise that you devise
a naming convention for your network devices, and accordingly apply an
appropriate hostname to each device in your AMF network.
Command List •“atmf area” on page 1167
•“atmf area password” on page 1168
•“atmf backup” on page 1170
•“atmf backup area-masters delete” on page 1171
•“atmf backup area-masters enable” on page 1172
•“atmf backup area-masters now” on page 1173
•“atmf backup area-masters synchronize” on page 1174
•“atmf backup bandwidth” on page 1175
•“atmf backup delete” on page 1176
•“atmf backup enable” on page 1177
•“atmf backup now” on page 1178
•“atmf backup server” on page 1180
•“atmf backup stop” on page 1182
•“atmf backup synchronize” on page 1183
To Next Page
Loading...
Need help?
General
