1138 Command Reference for x230 Series Edge Switches C613-50055-01 REV A
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
RRP SNOOPING COMMANDS
SHOW
IP RRP SNOOPING
show ip rrp snooping
Overview Use this command to display Router Redundancy Protocol snooping global
settings and status.
Syntax
show ip rrp snooping
Mode Privileged Exec
Output The following example show the output display for the show ip rrp snooping
command
The following table shows the output display for the show ip rrp snooping
command
Related
Commands
ip rrp snooping
awplus#show ip rrp snooping
Status : Enabled
Vlan Master Virtual MAC Address UpTime
------------ ---------- ----------------------- ----------------
vlan1 Port1.0.1 00e0.2b00.0085 00:00:39
----------------------------------------------------------------
Parameter Description
Status Displays if RRP Snooping is enabled or disabled
Vlan Displays the VLAN ID
Master Displays the port ID connected to the master router or the network of
the master router
Virtual MAC
Address
Displays the virtual MAC address of the router
UpTime Displays the time that the current master router has been the master
router
To Next Page
Loading...
Need help?
General
