Allied Telesis AlliedWare Plus AT-x230-10GP - Chapter 43: RMON Commands; RMON Commands; Introduction

43
1439 Command Reference for x230 Series Edge Switches C613-50055-01 REV A
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
RMON Commands
Introduction
Overview This chapter provides an alphabetical reference for commands used to configure
Remote Monitoring (RMON).
For an introduction to RMON and an RMON configuration example, see the RMON
Feature Overview and Configuration Guide.
RMON is disabled by default in AlliedWare Plus™. No RMON alarms or events are
configured.
For information on filtering and saving command output, see “Controlling “show”
Command Output” in the “Getting Started with AlliedWare Plus” Feature Overview
and Configuration Guide.
Command List •“rmon alarm” on page 1440
•“rmon collection history” on page 1442
•“rmon collection stats” on page 1443
•“rmon event” on page 1444
•“show rmon alarm” on page 1445
•“show rmon event” on page 1446
•“show rmon history” on page 1448
•“show rmon statistics” on page 1450