Allied Telesis AlliedWare Plus AT-x230-10GP User Manual

C613-50055-01 REV A Command Reference for x230 Series Edge Switches 1013
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
LOCAL RADIUS SERVER COMMANDS
DEBUG
CRYPTO PKI
debug crypto pki
Overview Use this command to enable Public Key Infrastructure (PKI) debugging. When PKI
debugging is enabled, the PKI module starts generating diagnostic messages to
the system log.
Use the no variant of this command to disable Public Key Infrastructure (PKI)
debugging. When PKI debugging is disabled, the PKI module stops generating
diagnostic messages to the system log.
Syntax
debug crypto pki
no debug crypto pki
Default PKI debugging is disabled by default
Mode Privileged Exec
Examples To enable the PKI debugging facility, use the command:
awplus# debug crypto pki
To disable the PKI debugging facility, use the command:
awplus# no debug crypto pki

Allied Telesis AlliedWare Plus AT-x230-10GP Specifications

General

Brand	Allied Telesis
Model	AlliedWare Plus AT-x230-10GP
Category	Switch
Language	English