1134 Command Reference for x230 Series Edge Switches C613-50055-01 REV A
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
DHCP SNOOPING COMMANDS
SHOW
IP DHCP SNOOPING STATISTICS
Related
Commands
clear ip dhcp snooping statistics
ip dhcp snooping
ip dhcp snooping violation
Table 32-20: Parameters in the output from the show ip dhcp snooping
statistics command
Parameter Description
Interface The interface name.
In Packets The total number of incoming packets that are processed
by DHCP Snooping.
In BOOTP Requests The total number of incoming BOOTP Requests.
In BOOTP Replies The total number of incoming BOOTP Replies.
In Discards The total number of incoming packets that have been
discarded.
Invalid BOOTP
Information
Packet contained invalid BOOTP information, such as an
invalid BOOTP.OPCode.
Invalid DHCP ACK A DHCP ACK message was discarded, for reasons such as
missing Server Option or Lease Option.
Invalid DHCP
Release or Decline
A DHCP Release or Decline message was discarded, for
reasons such as mismatch between received interface
and current binding information.
Invalid IP/UDP
Header
A problem was detected in the IP or UDP header of the
packet.
Max Bindings
Exceeded
Accepting the packet would cause the maximum
number of bindings on a port to be exceeded.
Reply Received On
Untrusted Port
A BOOTP reply was received on an untrusted port.
Source MAC/CHADDR
Mismatch
The L2 Source MAC address of the packet did not match
the client hardware address field (BOOTP.CHADDR).
Static Entry
Already Exists
An entry could not be added as a static entry already
exists.
To Next Page
Loading...
Need help?
General
