C613-50055-01 REV A Command Reference for x230 Series Edge Switches 125
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
FILE MANAGEMENT COMMANDS
CREATE
AUTOBOOT
create autoboot
Overview Use this command to create an autoboot.txt file on external media. This
command will automatically ensure that the keys and values that are expected in
this file are correct. After the file is created the create autoboot command will
copy the current release and configuration files across to the external media. The
external media is then available to restore a release file and/or a configuration file
to the device.
Syntax
create autoboot [card]
Mode Privileged Exec
Example To create an autoboot.txt file on external media, use the command:
awplus# create autoboot card
Related
Commands
autoboot enable
show autoboot
show boot
To Next Page
Loading...
