1412 Command Reference for x230 Series Edge Switches C613-50055-01 REV A
AlliedWare Plusâ„¢ Operating System - Version 5.4.5-0.x
LLDP COMMANDS
SHOW
LLDP LOCAL-INFO
show lldp local-info
Overview This command displays local LLDP information that can be transmitted through
specified ports. If no port list is entered, local LLDP information for all ports is
displayed.
Syntax
show lldp local-info [base] [dot1] [dot3] [med] [interface
<port-list>]
Mode User Exec and Privileged Exec
Usage Whether and which local information is transmitted in advertisements via a port
depends on:
• whether the port is set to transmit LLDP advertisements (lldp transmit
receive command)
• which TLVs it is configured to send (lldp tlv-select command, lldp
med-tlv-select command)
Examples To display local information transmitted via port 1.0.1, use the command:
awplus# show lldp local-info interface port1.0.1
To display local information transmitted via all ports, use the command:
awplus# show lldp local-info
Parameter Description
base Information for base TLVs.
dot1 Information for 802.1 TLVs.
dot3 Information for 802.3 TLVs.
med Information for LLDP-MED TLVs.
<port-list> The ports for which the local information is to be shown.
To Next Page
Loading...
Need help?
General
