500 Command Reference for x230 Series Edge Switches C613-50055-01 REV A
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
LINK AGGREGATION COMMANDS
SHOW
PORT ETHERCHANNEL
show port etherchannel
Overview Use this command to show LACP details of the device port specified.
For information on filtering and saving command output, see “Controlling “show”
Command Output” in the “Getting Started with AlliedWare Plus” Feature Overview
and Configuration Guide.
Syntax
show port etherchannel <port>
Mode User Exec and Privileged Exec
Example
awplus# show port etherchannel port1.0.1
Output Figure 13-7: Example output from the show port etherchannel command
Parameter Description
<port> Name of the device port to display LACP information about.
To Next Page
Loading...
