EasyManuals Logo

Allied Telesis AlliedWare Plus AT-x230-10GP User Manual

Allied Telesis AlliedWare Plus AT-x230-10GP
1536 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #1003 background imageLoading...
Page #1003 background image
C613-50055-01 REV A Command Reference for x230 Series Edge Switches 1003
AlliedWare Plusâ„¢ Operating System - Version 5.4.5-0.x
LOCAL RADIUS SERVER COMMANDS
COPY
FDB-RADIUS-USERS (TO FILE)
copy fdb-radius-users (to file)
Overview Use this command to create a set of local RADIUS server users from MAC addresses
in the local FDB. A local RADIUS server user created using this command can be
used for MAC authentication.
Syntax
copy fdb-radius-users
{local-radius-user-db|flash|nvs|card|debug|tftp|scp|
fserver|<url>} [interface <port>] [vlan <vid>] [group <name>]
[export-vlan [<radius-group-name>]]
Mode Privileged Exec
Usage The local RADIUS server users created are written to a specified destination file in
local RADIUS user CSV (Comma Separated Values) format. The local RADIUS server
users can then be imported to a local RADIUS server using the copy
local-radius-user-db (from file) command.
The name and password of the local RADIUS server users created use a MAC
address, which can be used for MAC authentication.
Parameter Description
local-radius-
user-db
Copy the local RADIUS server users created to the local
RADIUS server.
flash Copy the local RADIUS server users created to Flash memory.
nvs Copy the local RADIUS server users created to NVS memory.
card Copy the local RADIUS server users created to SD card.
debug Copy the local RADIUS server users created to debug.
tftp Copy the local RADIUS server users created to the TFTP
destination.
scp Copy the local RADIUS server users created to the SCP
destination.
fserver Copy the local RADIUS server users created to the remote file
server.
<url> Copy the local RADIUS server users created to the specified
URL.
interface <port> Copy only MAC addresses learned on a specified device port.
Wildcards may be used when specifying an interface name.
vlan <vid> Copy only MAC addresses learned on a specified VLAN.
group <name> Assign a group name to the local RADIUS server users created.
export-vlan Export VLAN ID assigned to exported FDB entry.
<radius-group-
name>
Prefix for Radius group name storing VLAN ID

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Allied Telesis AlliedWare Plus AT-x230-10GP and is the answer not in the manual?

Allied Telesis AlliedWare Plus AT-x230-10GP Specifications

General IconGeneral
BrandAllied Telesis
ModelAlliedWare Plus AT-x230-10GP
CategorySwitch
LanguageEnglish

Related product manuals