Allied Telesis AlliedWare Plus AT-x230-10GP - Show Atmf Backup

C613-50055-01 REV A Command Reference for x230 Series Edge Switches 1247
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
AMF COMMANDS
SHOW
ATMF BACKUP
show atmf backup
Overview This command displays information about AMF backup status for all the nodes in
an AMF network. It can only be run on AMF master and controller nodes.
Syntax
show atmf backup [logs|server-status|synchronize [logs]]
Mode Privileged Exec
Parameter Description
logs Displays detailed log information.
server-status Displays connectivity diagnostics information for each
configured remote file server.
synchronize Display the file server synchronization status
logs For each remote file server, display the logs for the last
synchronization