214 Command Reference for x230 Series Edge Switches C613-50055-01 REV A
AlliedWare Plusâ„¢ Operating System - Version 5.4.5-0.x
SYSTEM CONFIGURATION AND MONITORING COMMANDS
SHOW
REBOOT HISTORY
show reboot history
Overview Use this command to display the device’s reboot history.
Syntax
show reboot history
Mode User Exec and Privileged Exec
Example To show the reboot history, use the command:
awplus# show reboot history
Output Figure 5-14: Example output from the show reboot history command
Related
Commands
show tech-support
awplus#show
reboot history
<date> <time> <type> <description>
-----------------------------------------------
2014-01-10 01:42:04 Expected User Request
2014-01-10 01:35:31 Expected User Request
2014-01-10 01:16:25 Unexpected Rebooting due to critical process (network/nsm)
failure!
2014-01-10 01:11:04 Unexpected Rebooting due to critical process (network/nsm)
failure!
2014-01-09 19:56:16 Expected User Request
2014-01-09 19:51:20 Expected User Request
Table 5-6: Parameters in the output from the show reboot history command
Parameter Description
Unexpected Reboot is counted by the continuous reboot prevention
feature if the reboot event occurs in the time period
specified for continuous reboot prevention.
Expected Reboot is not counted by continuous reboot prevention
feature.
User request User initiated reboot via the CLI.
To Next Page
Loading...
Need help?
General
