16
566 Command Reference for x230 Series Edge Switches C613-50055-01 REV A
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
IPv6 Commands
Introduction
Overview This chapter provides an alphabetical reference of commands used to configure
IPv6. For more information, see the IPv6 Feature Overview and Configuration
Guide.
Command List •“clear ipv6 neighbors” on page 567
•“ipv6 address” on page 568
•“ipv6 address autoconfig” on page 570
•“ipv6 enable” on page 572
•“ipv6 forwarding” on page 574
•“ipv6 nd minimum-ra-interval” on page 575
•“ipv6 nd ra-interval” on page 576
•“ipv6 nd raguard” on page 577
•“ipv6 nd suppress-ra” on page 579
•“ipv6 neighbor” on page 580
•“ipv6 opportunistic-nd” on page 581
•“ipv6 route” on page 582
•“ping ipv6” on page 583
•“show ipv6 forwarding” on page 584
•“show ipv6 interface brief” on page 585
•“show ipv6 neighbors” on page 586
•“show ipv6 route” on page 587
•“show ipv6 route summary” on page 589
•“traceroute ipv6” on page 590
To Next Page
Loading...
Need help?
General
