Allied Telesis AlliedWare Plus AT-x230-10GP - Show Class-Map

794 Command Reference for x230 Series Edge Switches C613-50055-01 REV A
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
QOS COMMANDS
SHOW
CLASS-MAP
show class-map
Overview Use this command to display the QoS class-maps’ criteria for classifying traffic.
Syntax
show class-map [<class-map-name>]
Mode User Exec and Privileged Exec
Example To display a QoS class-map’s match criteria for classifying traffic, use the command:
awplus# show class-map cmap1
Output Figure 24-2: Example output from the show class-map command
Related
Commands
class-map
Parameter Description
<class-map-name> Name of the class-map.
CLASS-MAP-NAME: cmap1
Set IP DSCP: 56
Match IP DSCP: 7