Allied Telesis AlliedWare Plus AT-x230-10GP - Show Snmp-Server Community

C613-50055-01 REV A Command Reference for x230 Series Edge Switches 1341
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
SNMP COMMANDS
SHOW
SNMP-SERVER COMMUNITY
show snmp-server community
Overview This command displays the SNMP server communities configured on the device.
SNMP communities are specific to v1 and v2c.
Syntax
show snmp-server community
Mode Privileged Exec
Example To display the SNMP server communities, use the command:
awplus# show snmp-server community
Output Figure 40-5: Example output from the show snmp-server community
command
Related
Commands
show snmp-server
snmp-server community
SNMP community information:
Community Name ........... public
Access ................. Read-only
View ................... none