Allied Telesis AlliedWare Plus AT-x230-10GP - Debug Igmp

630 Command Reference for x230 Series Edge Switches C613-50055-01 REV A
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
IGMP SNOOPING COMMANDS
DEBUG
IGMP
debug igmp
Overview Use this command to enable debugging of either all IGMP or a specific component
of IGMP.
Use the no variant of this command to disable all IGMP debugging, or debugging
of a specific component of IGMP.
Syntax
debug igmp {all|decode|encode|events|fsm|tib}
no debug igmp {all|decode|encode|events|fsm|tib}
Modes Privileged Exec and Global Configuration
Usage This command applies to interfaces configured for IGMP Snooping.
Example
awplus# configure terminal
awplus(config)# debug igmp all
Related
Commands
show debugging igmp
undebug igmp
Parameter Description
all Enable or disable all debug options for IGMP
decode Debug of IGMP packets that have been received
encode Debug of IGMP packets that have been sent
events Debug IGMP events
fsm Debug IGMP Finite State Machine (FSM)
tib Debug IGMP Tree Information Base (TIB)