C613-50055-01 REV A Command Reference for x230 Series Edge Switches 969
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
AAA COMMANDS
ACCOUNTING
LOGIN
accounting login
Overview This command applies a login accounting method list to console or vty lines for
user login. When login accounting is enabled using this command, logging events
generate an accounting record to the accounting server.
The accounting method list must be configured first using this command. If an
accounting method list is specified that has not been created by this command
then accounting will be disabled on the specified lines.
The no variant of this command resets AAA (Authentication, Authorization,
Accounting) Accounting applied to console or vty lines for local or remote login.
default login accounting is applied after issuing the no accounting login
command. Accounting is disabled with default.
Syntax
accounting login {default|<list-name>}
no accounting login
Default By default login accounting is disabled in the default accounting server. No
accounting will be performed until accounting is enabled using this command
beforehand.
Mode Line Configuration
Examples To apply the accounting server USERS to all vty lines use the following commands:
awplus# configure terminal
awplus(config)# line vty 0 32
awplus(config-line)# accounting login USERS
To reset accounting for login sessions on the console, use the following
commands:
awplus# configure terminal
awplus(config)# line console 0
awplus(config-line)# no accounting login
Related
Commands
aaa accounting commands
aaa accounting login
Parameter Description
default Default accounting method list.
<list-name> Named accounting method list.
To Next Page
Loading...
