Allied Telesis AlliedWare Plus AT-x230-10GP - Chapter 15: IP Addressing and Protocol Commands; IP Addressing and Protocol Commands; Introduction

15
530 Command Reference for x230 Series Edge Switches C613-50055-01 REV A
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
IP Addressing and
Protocol Commands
Introduction
Overview This chapter provides an alphabetical reference of commands used to configure
the following protocols:
• Address Resolution Protocol (ARP)
•Domain Name Service (DNS)
For more information, see the IP Feature Overview and Configuration Guide.
Command List •“arp-aging-timeout” on page 532
•“arp-mac-disparity” on page 533
•“arp (IP address MAC)” on page 534
•“arp log” on page 535
•“arp opportunistic-nd” on page 539
•“clear arp-cache” on page 540
•“debug ip packet interface” on page 541
•“ip address” on page 543
•“ip gratuitous-arp-link” on page 545
•“ip name-server” on page 547
•“ping” on page 548
•“show arp” on page 549
•“show debugging ip packet” on page 551
•“show ip interface” on page 553
•“show ip sockets” on page 554
•“show ip traffic” on page 557
•“tcpdump” on page 563