C613-50055-01 REV A Command Reference for x230 Series Edge Switches 91
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
USER ACCESS COMMANDS
SERVICE
HTTP
service http
Overview This command enables the HTTP (Hypertext Transfer Protocol) service. The HTTP
service is enabled by default and is required to support the AlliedWare Plus™ GUI
Java applet on a Java enabled browser.
The no service http command disables the HTTP feature.
Syntax
service http
no service http
Default The HTTP service is enabled by default.
Mode Global Configuration
Examples To disable the HTTP service, use the command:
awplus# configure terminal
awplus(config)# no service http
To re-enable the HTTP service after it has been disabled, use the following
commands:
awplus# configure terminal
awplus(config)# service http
To Next Page
Loading...
