C613-50055-01 REV A Command Reference for x230 Series Edge Switches 1535
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
CABLE FAULT LOCATOR COMMANDS
SHOW
TEST CABLE-DIAGNOSTICS TDR
show test cable-diagnostics tdr
Overview This command displays the results of the last cable-diagnostics test that was run
using the TDR (Time Domain Reflectometry) on a fixed copper cable port.
The displayed status of the cable can be either:
•OK
•Open
• Short (within-pair)
• Short (across-pair)
• Error
Syntax
show test cable-diagnostics tdr
Mode Privileged Exec
Examples To show the results of a cable-diagnostics test use the following command:
awplus# show test cable-diagnostics tdr
Output Figure 47-1: Example output from the show test cable-diagnostics tdr
command
Port Pair Length Status
------------------------------------------
1.0.1 A - OK
B - OK
C 5 +/- 5 m Open
To Next Page
Loading...
