C613-50055-01 REV A Command Reference for x230 Series Edge Switches 1063
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
SECURE SHELL (SSH) COMMANDS
SHOW
CRYPTO KEY HOSTKEY
show crypto key hostkey
Overview This command displays the SSH host keys generated by RSA and DSA algorithm.
A host key pair (public and private keys) is needed to enable SSH server. The private
key remains on the device secretly. The public key is copied to SSH clients to
identify the server
Syntax
show crypto key hostkey [dsa|rsa|rsa1]
Mode User Exec, Privileged Exec and Global Configuration
Examples To show the public keys generated on the device for SSH server, use the command:
awplus# show crypto key hostkey
To display the RSA public key of the SSH server, use the command:
awplus# show crypto key hostkey rsa
Output Figure 31-1: Example output from the show crypto key hostkey command
Related
Commands
crypto key destroy hostkey
crypto key generate hostkey
Parameter Description
dsa Displays the DSA algorithm public key.
rsa Displays the RSA algorithm public key for SSH version 2 connections.
rsa1 Displays the RSA algorithm public key for SSH version 1 connections.
Type Bits Fingerprint
-----------------------------------------------------------
rsa 2058 4e:7d:1d:00:75:79:c5:cb:c8:58:2e:f9:29:9c:1f:48
dsa 1024 fa:72:3d:78:35:14:cb:9a:1d:ca:1c:83:2c:7d:08:43
rsa1 1024 e2:1c:c8:8b:d8:6e:19:c8:f4:ec:00:a2:71:4e:85:8b
Table 31-1: Parameters in output of the show crypto key hostkey command
Parameter Description
Type Algorithm used to generate the key.
Bits Length in bits of the key.
Fingerprint Checksum value for the public key.
To Next Page
Loading...
Need help?
General
