1026 Command Reference for x230 Series Edge Switches C613-50055-01 REV A
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
LOCAL RADIUS SERVER COMMANDS
SHOW
CRYPTO PKI CERTIFICATES LOCAL-RADIUS-ALL-USERS
show crypto pki certificates
local-radius-all-users
Overview Use this command to display certificate information for local RADIUS server users.
For information on filtering and saving command output, see “Controlling “show”
Command Output” in the “Getting Started with AlliedWare Plus” Feature Overview
and Configuration Guide.
Syntax
show crypto pki certificates local-radius-all-users
Mode User Exec and Privileged Exec
Example The following command displays information of all local RADIUS server user
certificates.
awplus# show crypto pki certificates local-radius-all-users
Output
Table 29-3: Example output from the show crypto pki certificates
local-radius-all- users command
awplus#show crypto pki certificates local-radius-all-users
Certificate:
Data:
Version: 3 (0x2)
Serial Number: 2 (0x2)
Signature Algorithm: sha1WithRSAEncryption
Issuer: O=Allied-Telesis, CN=AlliedwarePlusCA
Validity
Not Before: Oct 8 07:50:55 2009 GMT
Not After : Oct 6 07:50:55 2019 GMT
Subject: O=Allied-Telesis, CN=Tom
Table 29-4: Parameters in the output of the show crypto pki certificates
local-radius- all-users command
Parameter Description
Certificate Certificate name.
Version Protocol version.
Serial Number Serial number of the certificate.
Signature Algorithm Algorithm used for the certificate signature.
Issuer Subject of issuer creating the certificate.
To Next Page
Loading...
Need help?
General
