Allied Telesis AlliedWare Plus AT-x230-10GP - Chapter 36: Management Stacking Commands; Introduction

36
1291 Command Reference for x230 Series Edge Switches C613-50055-01 REV A
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
Management
Stacking
Commands
Introduction
Overview This chapter provides an alphabetical reference of commands used to configure
management stacking.
For introductory information about management stacking in AlliedWare Plus,
including overview and configuration information, see the Management Stacking
Feature Overview and Configuration Guide.
Command List •“mstack command-node” on page 1292
•“mstack enable” on page 1293
•“mstack remote-login” on page 1294
•“show mstack nodes” on page 1296
•“switchport mstack-link” on page 1297