C613-50055-01 REV A Command Reference for x230 Series Edge Switches 145
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
FILE MANAGEMENT COMMANDS
SHOW
RUNNING-CONFIG
show running-config
Overview This command displays the current configuration of the device. The output
includes all non-default configuration; default settings are not displayed.
You can control the output in any one of the following ways:
• To display only lines that contain a particular word, enter | include word
after the command
• To start the display at the first line that contains a particular word, enter |
begin word after the command
• To save the output to a file, enter > filename after the command
For information on filtering and saving command output, see “Controlling “show”
Command Output” in the “Getting Started with AlliedWare Plus” Feature Overview
and Configuration Guide.
Syntax
show running-config
Mode Privileged Exec and Global Configuration
Example To display the current dynamic configuration of your device, use the command:
awplus# show running-config
To Next Page
Loading...
Need help?
General
