Allied Telesis AlliedWare Plus AT-x230-10GP - Copy Zmodem

124 Command Reference for x230 Series Edge Switches C613-50055-01 REV A
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
FILE MANAGEMENT COMMANDS
COPY
ZMODEM
copy zmodem
Overview This command allows you to copy files using ZMODEM using Minicom. ZMODEM
works over a serial connection and does not need any interfaces configured to do
a file transfer.
Syntax
copy <source-name> zmodem
copy zmodem
Mode Privileged Exec
Example To copy the local file asuka.key using ZMODEM, use the command:
awplus# copy asuka.key zmodem
Related
Commands
copy (filename)
show file systems
Parameter Description
<source-name> The filename and path of the source file. See Introduction on
page 106 for valid syntax.