C613-50055-01 REV A Command Reference for x230 Series Edge Switches 123
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
FILE MANAGEMENT COMMANDS
COPY
(FILENAME)
Do not use spaces or parentheses within filenames. Use hyphens or underlines
instead.
Examples To use TFTP to copy the file bob.key into the current directory from the remote
server at 10.0.0.1, use the command:
awplus# copy tftp://10.0.0.1/bob.key bob.key
To use SFTP to copy the file new.cfg into the current directory from a remote
server at 10.0.1.2, use the command:
awplus# copy sftp://10.0.1.2/new.cfg bob.key
To use SCP with the username beth to copy the file old.cfg into the directory
config_files on a remote server that is listening on TCP port 2000, use the
command:
awplus# copy scp://beth@serv:2000/config_files/old.cfg old.cfg
To copy the file newconfig.cfg onto your device’s Flash from an SD (or SDHC)
Card, use the command:
awplus# copy card:/newconfig.cfg flash:/newconfig.cfg
To copy the file newconfig.cfg to an SD (or SDHC) Card from your device’s
Flash, use the command:
awplus# copy flash:/newconfig.cfg card:/newconfig.cfg
To copy the file config.cfg into the current directory from an SD (or SDHC)
Card, and rename it to configtest.cfg, use the command:
awplus# copy card:/config.cfg configtest.cfg
To copy the file config.cfg into the current directory from a remote file server,
and rename it to configtest.cfg, use the command:
awplus# copy fserver:/config.cfg configtest.cfg
Related
Commands
copy zmodem
edit (filename)
show file systems
To Next Page
Loading...
