Allied Telesis AlliedWare Plus AT-x230-10GP - Traceroute Ipv6

590 Command Reference for x230 Series Edge Switches C613-50055-01 REV A
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
IPV6 COMMANDS
TRACEROUTE
IPV6
traceroute ipv6
Overview Use this command to trace the route to the specified IPv6 host.
Syntax
traceroute ipv6 {<ipv6-addr>|<hostname>}
Mode User Exec and Privileged Exec
Example To run a traceroute for the IPv6 address 2001:0db8::a2, use the following
command:
awplus# traceroute ipv6 2001:0db8::a2
Related
Commands
ping ipv6
Parameter Description
<ipv6-addr> The destination IPv6 address. The IPv6 address uses the format
X:X::X:X.
<hostname> The destination hostname.