Allied Telesis AlliedWare Plus AT-x230-10GP - Show Lacp-Counter

C613-50055-01 REV A Command Reference for x230 Series Edge Switches 499
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
LINK AGGREGATION COMMANDS
SHOW
LACP-COUNTER
show lacp-counter
Overview Use this command to display the packet traffic on all ports of all present LACP
aggregators, or a given LACP aggregator.
For information on filtering and saving command output, see “Controlling “show”
Command Output” in the “Getting Started with AlliedWare Plus” Feature Overview
and Configuration Guide.
Syntax
show
lacp-counter [<1-32>]
Mode User Exec and Privileged Exec
Example
awplus# show lacp-counter 2
Output Figure 13-6: Example output from the show lacp-counter command
Parameter Description
<1-32>
% Traffic statistics
Port LACPDUs Marker Pckt err
Sent Recv Sent Recv Sent Recv
% Aggregator po2 (IfIndex: 4604)
port1.0.2 0 0 0 0 0 0