C613-50055-01 REV A Command Reference for x230 Series Edge Switches 493
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
LINK AGGREGATION COMMANDS
SHOW
DIAGNOSTIC CHANNEL-GROUP
show diagnostic channel-group
Overview This command displays dynamic and static channel group interface status
information. The output of this command is useful for Allied Telesis authorized
service personnel for diagnostic purposes.
For information on filtering and saving command output, see “Controlling “show”
Command Output” in the “Getting Started with AlliedWare Plus” Feature Overview
and Configuration Guide.
Syntax
show diagnostic channel-group
Mode User Exec and Privileged Exec
Example
awplus# show diagnostic channel-group
To Next Page
Loading...
Need help?
General
