1534 Command Reference for x230 Series Edge Switches C613-50055-01 REV A
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
CABLE FAULT LOCATOR COMMANDS
CLEAR
TEST CABLE-DIAGNOSTICS TDR
clear test cable-diagnostics tdr
Overview This command clears the results of the last cable test that was run.
Syntax
clear test cable-diagnostics tdr
Mode Privileged Exec
Examples To clear the results of a previous cable-diagnostics test use the following
commands:
awplus# clear test cable-diagnostics tdr
To Next Page
Loading...
