782 Command Reference for x230 Series Edge Switches C613-50055-01 REV A
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
QOS COMMANDS
NO
POLICE
no police
Overview Use this command to disable any policer previously configured on the class-map.
Syntax
no police
Mode Policy Map Class Configuration
Usage This command disables any policer previously configured on the class-map.
Example To disable policing on a class-map use the command:
awplus# configure terminal
awplus(config)# policy-map name
awplus(config-pmap)# class classname
awplus(config-pmap-c)# no police
To Next Page
Loading...
