920 Command Reference for x230 Series Edge Switches C613-50055-01 REV A
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
AUTHENTICATION COMMANDS
SHOW
AUTH-MAC
show auth-mac
Overview This command shows authentication information for MAC-based authentication.
Syntax
show auth-mac [all]
Mode Privileged Exec
Example To display all MAC-based authentication information, enter the command:
awplus# show auth-mac all
Output Figure 26-2: Example output from the show auth-mac command
Related
Commands
show dot1x
show auth-web
Parameter Description
all Display all authentication information for each interface available on
the switch.
802.1X Port-Based Authentication Disabled
MAC-based Port Authentication Enabled
WEB-based Port Authentication Disabled
To Next Page
Loading...
