Allied Telesis AlliedWare Plus AT-x230-10GP - Write Memory

C613-50055-01 REV A Command Reference for x230 Series Edge Switches 163
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
FILE MANAGEMENT COMMANDS
WRITE
MEMORY
write memory
Overview This command copies the running-config into the file that is set as the current
startup-config file. This command is a synonym of the write file and copy
running-config startup-config commands.
Syntax
write [memory]
Mode Privileged Exec
Example To write configuration data to the start-up configuration file, use the command:
awplus# write memory
Related
Commands
copy running-config
write file
show running-config