C613-50055-01 REV A Command Reference for x230 Series Edge Switches 425
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
SPANNING TREE COMMANDS
SHOW
SPANNING-TREE MST DETAIL
show spanning-tree mst detail
Overview This command displays detailed information about each instance, and all
interfaces associated with that particular instance.
For information on filtering and saving command output, see “Controlling “show”
Command Output” in the “Getting Started with AlliedWare Plus” Feature Overview
and Configuration Guide.
Syntax
show spanning-tree mst detail
Mode User Exec, Privileged Exec and Interface Configuration
Example To display detailed information about each instance, and all interfaces associated
with them, enter the command:
awplus# show spanning-tree mst detail
Output Figure 12-7: Example output from the show spanning-tree mst detail
command
To Next Page
Loading...
