156 Command Reference for x230 Series Edge Switches C613-50055-01 REV A
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
FILE MANAGEMENT COMMANDS
SHOW
RUNNING-CONFIG POWER-INLINE
show running-config power-inline
Overview Use this command to show the Power over Ethernet (PoE) running system status
and configuration details. The PoE usage-threshold percentage as specified by the
power-inline usage-threshold command is displayed in the running-config using
this command.
Syntax
show running-config power-inline
Mode Privileged Exec and Global Configuration
Example To display the PoE running system status and configuration details, use the
command:
awplus# show running-config power-inline
Output Figure 3-19: Example output from the show running-config power-inline
command
Related
Commands
power-inline usage-threshold
show power-inline
!
power-inline usage-threshold 90
!
To Next Page
Loading...
