Allied Telesis AlliedWare Plus AT-x230-10GP - Show Running-Config As-Path Access-List

148 Command Reference for x230 Series Edge Switches C613-50055-01 REV A
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
FILE MANAGEMENT COMMANDS
SHOW
RUNNING-CONFIG AS-PATH ACCESS-LIST
show running-config as-path access-list
Overview Use this command to show the running system status and configuration details for
as-path access-list.
Syntax
show running-config as-path access-list
Mode Privileged Exec and Global Configuration
Example To display the running system status and configuration details for as-path
access-list, use the command:
awplus# show running-config as-path access-list
Output Figure 3-11: Example output from the show running-config as-path
access-list command
Related
Commands
copy running-config
show running-config
!
ip as-path access-list wer permit knsmk
!